How To Spray Paint Outdoor Light Fixtures

How to Spray Paint Outdoor Light Fixtures

If your outdoor light fixtures are looking a little worse for wear, don't despair! You can easily give them a new lease on life with a fresh coat of spray paint. Here's a step-by-step guide to help you get the job done right.

Materials You'll Need

Spray paint (choose a color and finish that complements your home's exterior)
Primer (optional, but recommended for better adhesion and durability)
Sandpaper (120-grit or higher)
Tack cloth
Drop cloth
Painter's tape (optional)

Preparing the Light Fixture

1. Remove the light fixture from the wall or post. 2. Disassemble the fixture into smaller components, if possible. 3. Sand the surface of the fixture lightly to remove any rust, dirt, or old paint. 4. Wipe the fixture down with a tack cloth to remove any sanding dust.

Applying Primer (Optional)

1. If desired, apply a coat of primer to the fixture. This will help the paint adhere better and last longer. 2. Allow the primer to dry completely before moving on to the next step.

Applying the Paint

1. Shake the can of spray paint thoroughly before using. 2. Hold the can about 8-12 inches from the fixture and apply a thin, even coat of paint. 3. Allow the first coat to dry completely before applying a second coat. 4. If necessary, apply a third coat for full coverage.

Reassembling the Fixture

1. Once the paint is completely dry, reassemble the light fixture. 2. Reinstall the fixture on the wall or post. 3. Turn on the light and enjoy your newly painted outdoor light fixture!

Tips

For a smoother finish, use light, even strokes when spraying the paint.
If you are painting multiple fixtures, it is best to do them all at the same time to ensure consistency.
If you make a mistake, don't worry! Simply let the paint dry and sand it off before repainting.
To protect the surrounding area from overspray, cover it with a drop cloth or painter's tape.