How To Set Noma Outdoor Light Timer With Motion Sensor

How to Set Noma Outdoor Light Timer with Motion Sensor

Noma Outdoor Light Timers with Motion Sensors are a great way to add security and convenience to your home. They can be used to automatically turn on your lights when motion is detected, which can deter burglars and other unwanted guests. They can also be used to turn on your lights at a specific time each day, so you don't have to worry about forgetting to turn them on when it gets dark.

To set a Noma Outdoor Light Timer with Motion Sensor, follow these steps:

Turn off the power to the light fixture where you want to install the timer.
Remove the faceplate from the light fixture and disconnect the wires.
Connect the wires from the timer to the wires from the light fixture. The black wire from the timer should be connected to the black wire from the light fixture, the white wire from the timer should be connected to the white wire from the light fixture, and the green wire from the timer should be connected to the ground wire from the light fixture.
Reattach the faceplate to the light fixture.
Turn on the power to the light fixture.
Adjust the settings on the timer. The timer has three dials: one for the time, one for the sensitivity, and one for the duration.
Turn the time dial to the desired time that you want the lights to turn on.
Turn the sensitivity dial to the desired sensitivity. The higher the sensitivity, the more likely the lights will turn on when motion is detected.
Turn the duration dial to the desired duration that you want the lights to stay on after motion is detected.
Test the timer by walking in front of the motion sensor. The lights should turn on and stay on for the duration that you set on the timer.

Once you have set the timer, you can forget about it. It will automatically turn on your lights when motion is detected, and it will turn them off after the duration that you set on the timer.

Here are some tips for using a Noma Outdoor Light Timer with Motion Sensor:

Make sure that the motion sensor is positioned so that it can detect motion from the area that you want to cover.
Adjust the sensitivity of the motion sensor so that it does not turn on the lights when there is no movement in the area.
Set the duration of the timer so that the lights stay on for a long enough period of time to provide adequate lighting.
Test the timer regularly to make sure that it is working properly.

By following these tips, you can use a Noma Outdoor Light Timer with Motion Sensor to add security and convenience to your home.