How To Replace Photo Sensor Outdoor Light

How to Replace a Photo Sensor Outdoor Light

Photo sensor outdoor lights are a convenient way to light up your outdoor space automatically when it gets dark. However, over time, the photo sensor can fail, and you will need to replace it. Replacing a photo sensor outdoor light is a relatively easy task that can be completed in a few minutes.

Here are the steps on how to replace a photo sensor outdoor light:

1. Turn off the power to the light fixture

The first step is to turn off the power to the light fixture. You can do this by turning off the circuit breaker or fuse that controls the light fixture.

2. Remove the light fixture

Once the power is off, you can remove the light fixture from the wall or ceiling. Most light fixtures are held in place by a few screws. Once you have removed the screws, you can carefully pull the light fixture away from the wall or ceiling.

3. Locate the photo sensor

The photo sensor is usually located on the back of the light fixture. It is a small, black or gray device with two wires attached to it.

4. Disconnect the wires from the photo sensor

Use a pair of pliers to disconnect the wires from the photo sensor. Be careful not to damage the wires.

5. Connect the wires to the new photo sensor

Take the new photo sensor and connect the wires to the corresponding terminals. The black wire should be connected to the black terminal, and the white wire should be connected to the white terminal.

6. Install the new photo sensor

Place the new photo sensor in the same location as the old photo sensor. Secure it in place with the screws.

7. Reinstall the light fixture

Reinstall the light fixture on the wall or ceiling. Make sure that the wires are not pinched or damaged.

8. Turn on the power to the light fixture

Turn on the circuit breaker or fuse that controls the light fixture. The light fixture should now turn on automatically when it gets dark.

Replacing a photo sensor outdoor light is a relatively easy task that can be completed in a few minutes. By following these steps, you can ensure that your outdoor light will continue to function properly for years to come.