How To Replace Outdoor Wall Light Fixture

How to Replace an Outdoor Wall Light Fixture

Replacing an outdoor wall light fixture is a relatively simple task that can be completed in a few hours. By following these steps, you can safely and easily replace your old light fixture with a new one.

Tools and Materials You'll Need:

- Phillips head screwdriver - Flathead screwdriver - Wire strippers - Electrical tape - Voltage tester - New outdoor light fixture

Safety Precautions:

- Always turn off the power to the light fixture at the circuit breaker or fuse box before beginning work. - Wear safety glasses to protect your eyes from flying debris. - Use a ladder that is tall enough to reach the light fixture safely.

Instructions:

1. Remove the Old Light Fixture: - Use a Phillips head screwdriver to remove the screws that hold the light fixture to the wall. - Carefully pull the light fixture away from the wall, being careful not to damage the wires. - Disconnect the wires from the light fixture by loosening the screws on the wire nuts. - Use a flathead screwdriver to pry the wire nuts open and separate the wires. - Remove the old light fixture from the wall. 2. Install the New Light Fixture: - Feed the wires from the new light fixture through the hole in the wall. - Connect the wires to the wires from the house using wire nuts. - Twist the wire nuts clockwise until they are tight. - Wrap electrical tape around the wire nuts to insulate them. - Push the new light fixture into the hole in the wall. - Secure the light fixture to the wall using the screws provided. 3. Test the New Light Fixture: - Turn on the power to the light fixture at the circuit breaker or fuse box. - Use a voltage tester to make sure that the light fixture is receiving power. - Turn on the light switch to test the new light fixture. 4. Clean Up: - Dispose of the old light fixture and any debris. - Clean the area around the light fixture to remove any dirt or dust.

Tips:

- If you are not comfortable working with electricity, it is best to hire a qualified electrician to replace your outdoor wall light fixture. - If the wires are damaged or frayed, they should be replaced before installing the new light fixture. - Use a weather-resistant light fixture for outdoor use. - Make sure that the new light fixture is the same size as the old light fixture to avoid any gaps around the edges.