How To Replace Outdoor Light Fixtures

Replacing an outdoor light fixture is a relatively simple task that can be completed in a few hours. However, there are a few things you need to keep in mind before you get started.

Safety First

Before you begin, make sure to turn off the power to the light fixture at the breaker panel. This will help prevent you from getting shocked while you are working.

Gather Your Materials

You will need the following materials to replace an outdoor light fixture:

A new light fixture
A screwdriver
Electrical tape
Wire nuts

Remove the Old Light Fixture

Once you have gathered your materials, you can begin removing the old light fixture. Start by removing the screws that hold the light fixture in place. Once the screws are removed, carefully pull the light fixture away from the wall.

Disconnect the Wires

Once the light fixture is removed, you will need to disconnect the wires. Start by disconnecting the black wire, followed by the white wire. Once the wires are disconnected, you can remove the old light fixture.

Install the New Light Fixture

Now that the old light fixture is removed, you can install the new light fixture. Start by threading the wires from the new light fixture through the hole in the wall. Once the wires are through the hole, connect the black wire to the black wire on the wall, and the white wire to the white wire on the wall. Secure the connections with wire nuts.

Mount the Light Fixture

Once the wires are connected, you can mount the light fixture to the wall. Start by screwing the mounting bracket to the wall. Once the mounting bracket is secure, hang the light fixture on the bracket.

Turn on the Power

Once the light fixture is mounted, you can turn on the power at the breaker panel. The new light fixture should now be working.

Tips

Here are a few tips for replacing an outdoor light fixture:

If you are not comfortable working with electricity, it is best to hire a qualified electrician to replace the light fixture for you.
Make sure to turn off the power to the light fixture before you begin working.
Be careful not to overtighten the screws when you are mounting the light fixture.
If you have any questions, consult the instructions that came with the new light fixture.