How To Recover Outdoor Cushions Without Sewing

Recovering outdoor cushions without sewing is a simple and cost-effective way to give your outdoor furniture a new look. By following a few simple steps, you can easily replace the worn-out fabric on your cushions with new fabric, without the need for a sewing machine.

Before you begin, you will need the following materials:

New fabric
Scissors
Measuring tape or ruler
Fabric glue
Optional: Staple gun and staples

Step 1: Measure and cut the fabric

Measure the length and width of the cushion, and then add 2 inches to each measurement. This will give you the size of the fabric you need to cut.

Step 2: Apply fabric glue to the cushion

Apply a thin layer of fabric glue to the top of the cushion. Be sure to cover the entire surface of the cushion, but avoid using too much glue, as this can make the fabric difficult to work with.

Step 3: Place the fabric on the cushion

Place the fabric on the cushion, aligning the edges of the fabric with the edges of the cushion. Smooth out the fabric and press it down firmly to secure it to the cushion.

Step 4: Trim the excess fabric

Once the fabric is secured to the cushion, trim any excess fabric around the edges. You can use scissors or a sharp knife to do this.

Step 5: Optional: Staple the fabric

For added security, you can staple the fabric to the cushion. Place staples around the edges of the fabric, spacing them about 2 inches apart.

Step 6: Allow the glue to dry

Allow the fabric glue to dry completely before using the cushion. The drying time will vary depending on the type of glue you used.