How To Program Intermatic Outdoor Timer

How to Program an Intermatic Outdoor Timer

Intermatic outdoor timers are a convenient way to automate the operation of outdoor lighting, irrigation systems, and other devices. By following a few simple steps, you can easily program your Intermatic timer to meet your specific needs.

Step 1: Gather your materials

You will need the following materials to program your Intermatic outdoor timer:

The Intermatic outdoor timer
A screwdriver
A pair of pliers
A pencil or pen
The timer's user manual (optional)

Step 2: Install the timer

Before you can program your Intermatic timer, you will need to install it. The timer should be installed in a dry, sheltered location near the devices that you want to control. For more detailed instructions on how to install your timer, please refer to the timer's user manual.

Step 3: Set the time

Once the timer is installed, you will need to set the time. To do this, use a screwdriver to loosen the screw on the front of the timer. Then, turn the dial until the correct time is displayed. Once the time is set, tighten the screw.

Step 4: Set the mode

The Intermatic outdoor timer has several different modes that you can choose from. The most common modes are:

Manual: In manual mode, the timer will turn on the devices that you have connected to it immediately.
Automatic: In automatic mode, the timer will turn on the devices that you have connected to it at the times that you have programmed.
Random: In random mode, the timer will turn on the devices that you have connected to it at random times within a specified range.

To set the mode, use a screwdriver to turn the dial on the front of the timer to the desired mode.

Step 5: Set the program

To set the program, you will need to use the pins on the timer's face. Each pin represents a different time of day. To set a time, simply push the pin in. To clear a time, simply pull the pin out.

You can set multiple times for each day. For example, you could set the timer to turn on your outdoor lights at sunset and turn them off at sunrise.

Step 6: Save your program

Once you have set the program, you will need to save it. To do this, simply press the "Save" button on the front of the timer. The timer will now store your program and will run it automatically.

Step 7: Test your program

Once you have saved your program, it is a good idea to test it to make sure that it is working properly. To do this, simply turn the timer to the "Manual" mode and then turn on the devices that you have connected to it. If the devices turn on, then your program is working properly.