How To Mount Outdoor Garage Lights Wall Mounted On

How to Mount Outdoor Garage Lights Wall Mounted

Proper outdoor lighting can tremendously boost your home's curb appeal and safety. Wall-mounted garage lights are great for illuminating driveways, walkways, and entryways. Here's a comprehensive guide to help you mount outdoor garage lights on a wall with ease:

Materials You'll Need:

Outdoor garage light fixture
Mounting bracket (usually included with the fixture)
Drill with masonry bits
Screws
Caulk (optional)

Step 1: Choose a Location

Select a suitable location for your garage light. Consider the area you want to illuminate, the height at which you want the light to be positioned, and any potential obstructions.

Step 2: Mark the Mounting Points

Use a pencil or marker to mark the location of the mounting holes on the wall. Align the mounting bracket with the marked points, ensuring that the light fixture will be level when installed.

Step 3: Drill Pilot Holes

Using a drill fitted with a masonry bit, create pilot holes at the marked points. The size of the bit should match the diameter of the screws you will be using.

Step 4: Insert Anchors (if necessary)

If you are drilling into drywall, you may need to insert plastic anchors to provide support for the screws. Insert the anchors into the holes and tap them flush with the wall's surface using a hammer.

Step 5: Attach the Mounting Bracket

Align the mounting bracket with the pilot holes and secure it to the wall using the screws. Tighten the screws firmly but do not overtighten.

Step 6: Connect the Fixture to the Bracket

Most garage light fixtures have a matching baseplate that attaches to the mounting bracket. Position the fixture on the bracket and secure it according to the manufacturer's instructions.

Step 7: Connect Electrical Wiring

If you are not comfortable handling electrical work, it is recommended to hire a qualified electrician. Connect the wiring from the garage light fixture to the electrical wires in the wall. Use wire nuts and electrical tape to secure the connections.

Step 8: Seal the Mounting Point (optional)

To prevent moisture from entering the fixture, you can apply a thin bead of caulk around the base of the fixture, where it meets the wall.

Step 9: Turn on the Light and Test

Flip the circuit breaker or switch that controls the garage light to turn it on. Verify that the light is working properly and illuminates the desired area.

Additional Tips:

Use high-quality materials to ensure durability and longevity.
Check local building codes for any specific requirements or restrictions.
Consider the style and finish of the light fixture to complement the exterior of your home.
For brighter and more uniform illumination, use LED lights.
If installing multiple garage lights, plan their placement for optimal coverage and minimize shadows.

By following these steps, you can efficiently mount outdoor garage lights on a wall, enhancing both the safety and aesthetics of your property.