How To Install Outdoor Security Lights

When it comes to securing your home, one of the most important steps is installing outdoor security lights. These lights can deter burglars, improve visibility at night, and make your home feel more safe and secure.

Installing outdoor security lights is a relatively simple process that can be completed in a few hours. However, there are a few things you need to keep in mind before you get started.

In this article, we will discuss the essential aspects of installing outdoor security lights, including:

Choosing the right lights
Placement of the lights
Wiring the lights
Testing the lights

Once you have considered these factors, you can be sure that your outdoor security lights will provide you with years of reliable service.

## Choosing the Right Lights

The first step in installing outdoor security lights is choosing the right lights. There are a few things you need to consider when making your choice, including:

The type of light: There are two main types of outdoor security lights: floodlights and motion sensor lights. Floodlights provide a wide beam of light that can cover a large area, while motion sensor lights only turn on when they detect movement.
The brightness: The brightness of a light is measured in lumens. The higher the lumen count, the brighter the light. You will need to choose a light that is bright enough to illuminate the area you want to cover, but not so bright that it is blinding.
The color temperature: The color temperature of a light is measured in Kelvin. The lower the Kelvin count, the warmer the light. You will need to choose a light that has a color temperature that is appropriate for the area you want to cover.

## Placement of the Lights

Once you have chosen the right lights, you need to decide where to place them. The best place to place outdoor security lights is around the perimeter of your home, especially near entrances and exits. You should also place lights in areas that are dark or poorly lit.

When placing your lights, be sure to consider the following:

The height of the lights: The height of the lights will determine how far they can illuminate. You will need to choose a height that is high enough to provide adequate coverage, but not so high that the lights are blinding.
The angle of the lights: The angle of the lights will determine the direction of the light. You will need to choose an angle that will illuminate the area you want to cover.
The location of obstacles: Be sure to avoid placing lights near obstacles that could block the light. This includes trees, shrubs, and fences.

## Wiring the Lights

Once you have placed your lights, you will need to wire them. The wiring process will vary depending on the type of lights you have chosen. However, there are a few general steps that you will need to follow:

Turn off the power to the circuit that you will be working on.
Connect the wires from the lights to the wires from the power source.
Secure the connections with electrical tape.
Turn on the power and test the lights.

## Testing the Lights

Once you have wired the lights, you need to test them to make sure they are working properly. To test the lights, simply turn them on and see if they illuminate the area you want to cover. You should also check to make sure that the motion sensor lights are working properly. To do this, walk around the area that the lights are covering and see if they turn on when you move.

If you have any problems with your outdoor security lights, be sure to consult an electrician. They can help you troubleshoot the problem and get your lights working properly.