How To Install Outdoor Light Post

Installing an outdoor light post is a relatively simple project that can add both beauty and function to your home's exterior. However, there are a few essential aspects to consider to ensure the project is completed safely and successfully. These aspects include choosing the right location, digging the hole, setting the post, and wiring the light fixture.

Choosing the Right Location

The first step is to choose the right location for your light post. Consider the following factors when making your decision:

The purpose of the light. Are you installing the light for security, ambiance, or both?
The height of the light. The height of the light will determine how much area it illuminates.
The proximity to other structures. Make sure the light post is not too close to your house, trees, or other structures.

Digging the Hole

Once you have chosen the location for your light post, you need to dig the hole. The hole should be twice as wide as the diameter of the light post and at least 24 inches deep. Use a post hole digger to make the job easier.

Setting the Post

Next, you need to set the light post in the hole. Place the post in the hole and backfill the hole with dirt. Tamp down the dirt firmly around the post to secure it.

Wiring the Light Fixture

Finally, you need to wire the light fixture to the electrical supply. This is a job that is best left to a qualified electrician. The electrician will connect the wires from the light fixture to the wires from the electrical supply and install a light bulb.

Once the light fixture is wired, your outdoor light post is complete. Enjoy the added beauty and function that it provides to your home's exterior.