How To Install Altair Outdoor Led Lanterns

How to Install Altair Outdoor LED Lanterns

Altair outdoor LED lanterns offer an elegant and energy-efficient way to illuminate your outdoor space. With proper installation, these lanterns can provide years of reliable and beautiful lighting.

Materials You'll Need:

Altair outdoor LED lantern
Mounting bracket
Screws
Drill
Screwdriver
Wire strippers
Electrical tape

Step-by-Step Instructions:

1. Choose a Mounting Location: Select a suitable location for your lantern, ensuring it will not interfere with any obstacles or pose a safety hazard.

2. Attach the Mounting Bracket: Determine the optimal height for your lantern and mark the mounting location on the wall. Drill pilot holes into the wall and secure the mounting bracket with screws.

3. Connect the Wires: Strip the ends of the electrical wires coming from the lantern and the mounting bracket by about 1/2 inch. Connect the black wire to the black wire, the white wire to the white wire, and the green wire to the bare copper ground wire using electrical tape.

4. Mount the Lantern: Carefully lift the lantern onto the mounting bracket and align the screws. Tighten the screws to secure the lantern in place.

5. Adjust the Light: Once the lantern is mounted, you can adjust the light direction by rotating the lantern's head. This allows you to customize the lighting to your preference.

Troubleshooting:

If the lantern does not turn on:

Check if the wires are securely connected.
Ensure the lantern switch is in the "on" position.
Verify that the power supply is functioning correctly.

If the light is flickering:

Tighten the wire connections.
Replace the light bulb if necessary.
Consult an electrician if the problem persists.

With careful installation and proper maintenance, your Altair outdoor LED lanterns will provide years of beautiful and functional illumination for your outdoor space.