How To Change Outdoor Flood Light Fixture

How to Change an Outdoor Flood Light Fixture

Outdoor flood lights are a great way to illuminate your home's exterior, but they can also be a pain to change when they burn out. Here's a step-by-step guide on how to do it safely and easily:

Step 1: Turn off the power

This is the most important step, as it will prevent you from getting shocked. Turn off the breaker or fuse that controls the flood light at your home's electrical panel.

Step 2: Remove the old flood light

Once the power is off, you can remove the old flood light. There are usually two screws that hold the light in place. Remove these screws and carefully pull the light straight down.

Step 3: Disconnect the wires

Once the flood light is removed, you will see three wires: a black wire, a white wire, and a green or bare copper wire. The black wire is the hot wire, the white wire is the neutral wire, and the green or bare copper wire is the ground wire. Disconnect the wires by loosening the screws on the wire nuts and pulling the wires apart.

Step 4: Connect the new flood light

Now it's time to connect the new flood light. Match up the wires on the new light with the wires on the old light. The black wire goes to the black wire, the white wire goes to the white wire, and the green or bare copper wire goes to the green or bare copper wire. Twist the wires together and tighten the screws on the wire nuts.

Step 5: Install the new flood light

Once the wires are connected, you can install the new flood light. Push the light straight up into place and tighten the screws that hold it in place.

Step 6: Turn on the power

Now you can turn the power back on at your home's electrical panel. The new flood light should now be working.

Tips for changing an outdoor flood light fixture

Here are a few tips to make changing an outdoor flood light fixture easier:

Use a flashlight if you're working in the dark.
Be careful not to drop the screws when you're removing them.
If you're not sure which wires go where, take a picture of the old light before you disconnect it.
If you're not comfortable working with electricity, call an electrician to change the flood light for you.

Changing an outdoor flood light fixture is a relatively simple task that can be done in a few minutes. Just be sure to follow the steps carefully and take proper safety precautions.