180 Degree Outdoor White Led Blade Motion Security Light Manual

Thank you for purchasing the 180 Degree Outdoor White LED Blade Motion Security Light. This manual will provide you with the necessary instructions for installation and operation.

Installation

Choose a suitable location for the light, ensuring that it has a clear view of the area you want to protect.
Use the screws provided to mount the mounting bracket to the wall or ceiling.
Connect the wires from the light to the wires from the mounting bracket, ensuring that the polarity is correct (black to black, white to white).
Tighten the screws on the wire connectors.
Push the light into the mounting bracket until it clicks into place.

Operation

The light has three operating modes:

Off: The light will only turn on when motion is detected.
Dusk to Dawn: The light will turn on at dusk and stay on until dawn.
Test: The light will turn on for 1 minute to allow you to test the motion sensor.

To change the operating mode, use the switch on the back of the light.

Motion Detection

The light uses a passive infrared (PIR) motion sensor to detect movement. The sensor has a range of 180 degrees and a detection distance of up to 30 feet.

You can adjust the sensitivity of the motion sensor using the knob on the back of the light. Turning the knob clockwise will increase the sensitivity, while turning it counterclockwise will decrease the sensitivity.

Light Output

The light produces 2,000 lumens of brightness, providing ample illumination for your outdoor space.

The light has a color temperature of 5,000 Kelvin, which is a bright white light that is ideal for security purposes.

Troubleshooting

The light does not turn on: Check that the light is properly connected to the power supply. Also, check that the motion sensor is not blocked.
The light turns on but does not stay on: The motion sensor may be too sensitive. Try adjusting the sensitivity knob.
The light turns on but does not detect motion: The motion sensor may be faulty. Contact the manufacturer for assistance.

Specifications

Power: 120VAC, 60Hz
Brightness: 2,000 lumens
Color Temperature: 5,000 Kelvin
Motion Detection Range: 180 degrees
Motion Detection Distance: Up to 30 feet
Operating Modes: Off, Dusk to Dawn, Test
Dimensions: 8.5" x 4.5" x 3.5"

Conclusion

The 180 Degree Outdoor White LED Blade Motion Security Light is a versatile and effective way to protect your home or business. With its bright light output, wide detection range, and adjustable sensitivity, this light is sure to meet your security needs.